Choose a currency below to display product prices in the selected currency.
Use your compressor or tire pump to easily reach 20 PSI!
Sold out, more arriving late February 2017.
The Red Paddle Co iSUP electric pump adaptor utilizes a standard Schrader valve fitting to couple with an air compressor or bike/tire pump.
With the valve in the closed position, insert the Schrader valve fitting and rotate to lock in place. Remove the cap on the fitting, and connect a standard electric pump, bike pump or compressor and inflate to the recommended PSI (20 PSI for Red Paddle Co boards).
This adaptor will work with a number of paddle boards such as Red Paddle Co, C4 Waterman, Airis, AquaGlide and Advanced Elements.
Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to top off the pressure.
Weight: 1 oz.
Need more info? Also see our Guide to Inflating Your High Pressure Inflatable Paddle Board.
There are 1 review(s) for this product
by Bobby W. – 25th May 2016
I use this to enable topping off the pressure in my board to 18-20psi by using a scuba tank with a Schrader valve inflator. This adapter does not keep the H R center valve depressed, so in order to check the pressure one must use an inline gauge while inflating. Otherwise, it works exactly as described, and is very well made.